If you take off on a two engine airplane with no engine failure and are below VMCA, will you have directional control?
If you take off on a two engine airplane with no engine failure and are below VMCA, will you have directional control?
Yes, some directional control as we still have two functioning engines.
When does speed change from IAS to Mach?
When does speed change from IAS to Mach?
At FL260
Do single engined planes have a VMCG?
Do single engined planes have a VMCG?
No, VMCG is defined as the minimum control speed on the ground, with one engine inoperative (critical engine on two engine airplanes), takeoff power on other engine(s), using aerodynamic controls only for directional control and thus only applicable to ME aircraft.
What effect does a wet runway have on V1?
What effect does a wet runway have on V1?
V1 is lower when the runway is wet than when the runway is dry, because of the longer ASDR on a wet runway.
What is an FMA used for?
What is an FMA used for?
Bright yellow lights will light up in the cockpit.
What is the role of Pilot Monitoring?
What is the role of Pilot Monitoring?
To monitor the flight management and aircraft control actions of the Pilot Flying and carry out support duties such as communications and check-list reading.
How does a stall strip work?
How does a stall strip work?
A stall strip, usually located close to the wing root, causes the airflow to separate at a lower angle of attack and ensures that the wing root stalls before the wing tips.
You are on a flight from Stansted to Amsterdam and just after T/O you are at your cleared level of 2000ft when you have a complete radio failure. What are your actions?
You are on a flight from Stansted to Amsterdam and just after T/O you are at your cleared level of 2000ft when you have a complete radio failure. What are your actions?
First continue on the SID and try all available resources to check if you have a complete radio failure.
If so, squawk 7600 and return towards the airport.
How does an altimeter work and which errors can an altimeter experience?
How does an altimeter work and which errors can an altimeter experience?
When an aircraft climbs, the static pressure in the instrument case decreases, which allows the enclosed capsule to expand.
This in turn moves the needle on the instrument to indicate a corresponding altitude.
During descent, the opposite function applies.
Altimeter errors can originate and vary from:
Instrument Pressure Time-lag Barometric Density Temperature Blocked static port
What are the components that make up a fuel plan for a minimum-fuel trip?
What are the components that make up a fuel plan for a minimum-fuel trip?
Taxi, trip, contingency, reserve and extra fuel.